Four Wheeler

Body paint Equipment

Body Paint Equipment

Paint Booth (MT-PB-1380)

Features

1. Inside Dimension L X W X H (m)
2. Outside Dimension L X W X H (m)
3. Main Doors - No., W X H (m)
4. Access Door - No., W X H (m)
5. Wall Panel Construction
6. Exhaust Fan
7. Control System
8. Base & Floor Construction
9. Lighting
10. Generator Setting Type
11. Intake Fan
12. Heating System
13. Filter System
14. Total Power (kw)

Paint Booth (MT-PB-1350)

# Features Specifications
1. Inside Dimension L X W X H (m) 6.9 X 3.9 X 2.7
2. Outside Dimension L X W X H (m) 7 X 5.45 X 3.4
3. Main Doors - No., W X H (m) 1 X 3 fold, 3 X 2.65
4. Access Door - No., W X H (m) 1, 0.65 X 1.8
5. Exhaust Fan Optional
6. Base & Floor Construction Fixed Height 300mm, Steel Fabricated, 2 Checkered - Plate Ramps 750 X 2000mm.
7. Lighting Upper Inclined Lights 24pcs., 36w each.
8. Generator Setting Type Side Upper Intake Air, Quadrate Steel Frame, Coated Steel.
9. Intake Fan 2 Double Intake Centrifugal Fan - 4kw each, Capacity 24,000 m3/h.
10. Wall Panel Construction  
11. Heating System Riello G20 Oil Burner, 200,000kcal, Stainless Steel Heat Exchanger, Max. Temp. 800c Electric Damper from Spraying to Baking Cycle.
12. Filter System Prefilter, High Efficiency Ceiling Filter, Floor Filter.
13. Control System Spraying, High Temperature Spraying, Baking Temperature, Time Setting, Failure Instruction Lamp, Lighting Switch.
14. Total Power (kw) 9kw

Paint Booth (MT-PB-1350F)

# Features Specifications (MT-PB-1350F)
1. Inside Dimension L X W X H (m) 6.9 X 3.9 X 2.7
2. Outside Dimension L X W X H (m) 7 X 5.45 X 3.4
3. Main Doors - No., W X H (m) 1 X 3 fold, 3 X 2.65
4. Access Door - No., W X H (m) 1, 0.65 X 1.8
5. Wall Panel Construction EPS 50mm thick, Tongue & Groove Interlock Construction; Roof Panel of Galvanized sheet.
6. Base & Floor Construction Fixed Height 300mm, Steel Fabricated, 2 Checkered - Plate Ramps 750 X 2000mm.
7. Lighting Upper Inclined Lights 24pcs., 36w each.
8. Generator Setting Type Side Upper Intake Air, Quadrate Steel Frame, Coated Steel.
9. Intake Fan 2 Double Intake Centrifugal Fan - 3kw each, Capacity 20,000m3/h.
10. EFanxhaust Optional
11. Heating System Riello G20 Oil Burner, 200,000kcal, Stainless Steel Heat Exchanger, Max. Temp. 800c Electric Damper from Spraying to Baking Cycle.
12. Filter System Prefilter, High Efficiency Ceiling Filter, Floor Filter.
13. Control System Spraying, High Temperature Spraying, Baking Temperature, Time Setting, Failure Instruction Lamp, Lighting Switch.
14. Total Power (kw) 9kw

INFRARED lamp (MT-il-1, mt-il-2)

MT-il-1

MT-il-2

Specifications (MT-il-1, mt-il-2)

  • Made from aluminum alloy, bright stainless steel and other special materials.
  • Choice of single tube or double tubes.
  • Full-automatic with electric timer.
  • Holding stand allows side to side, up and down movement; can reach car body roof too..
  • Single phase 220v 5/10A, 50Hz, Single tube 1100W, Double tubes 2200W.
  • Baking area : 800X500mm, 800X800mm.
  • Temperature : 400C - 750C
  • Time setting range: 0min - 60min.
  • Optionally equipped with Philips or Vpower 21’ quartz short wave infrared light tubes.
  • Distance measuring function available optionally.

INFRARED lamp (MT-il-3)

Features

  • Made from aluminum alloy, bright stainless steel and other special materials.
  • Optionally equipped with Philips or Vpower 21’ quartz short wave infrared light tubes.
  • Full-automatic with LCD digital electric timer.
  • Pneumatic lift, turning by 3600 , independent switch.
  • Single phase 220v 5/10A, 50Hz, Single tube 1100W, Double tubes 2200W.
  • Adjustable pulse ultrasonic paint baking system.
  • Temperature controller; temperature range - 400c - 750c
  • Distance measure function, available optionally.
  • Baking area 1200 X 1000mm.
  • Time setting range : 0min. - 60min.